Mating the True North Concepts MHA to a G-Code RTI Wheel (2023)


Thanks for watching!
This channel is entirely viewer funded by folks like YOU!


Hello and welcome back, the true north, Concepts mha that is their modular holster, adapter.

Most of y'all who have seen these have seen them being run with Safariland, qls, that's, their Safari lands, locking Fork system for their holsters.

But today I want to talk about the other option, which is G-Code RTI.

So let's start off with taking a look at my current G-Code, slash Safariland setup, all right so let's start off with what I've been running and that's, the Safariland 6000 series for a Glock 19 on the G-Code optimal drop system and I've got a Wilder strap there.

But the way this works is you get the adapter plate to go Safariland to G-Code RTI.

And that allows you to mount up right there.

And the reason I really prefer this guy over a standard Safariland mid-ride setup is the Safariland angles back this way into your leg.

And for me, it always just digs on my thigh.

So I, really like that.

This kind of comes out a little bit from the waist and then is nice and flat.

So this has been a really good setup, but I have a gun Channel and I got to try all the new hotness.

So here we go all right so here's, a quick before look on body.

It is a pretty much optimal drop as the name would suggest, uh, it's, not so low that it requires two leg straps or anything.

But it definitely gets you down below where you have to FBI style.

Come up, you know, it's not writing on the hip.

It just sets it down a little bit so that you can get a nice natural grab on the grip without having to hike too much.

You know of this business going on so leg strap or not do leg.

Strap I, ordered, the mha with no leg strap for now I may end up picking one up later, but I would really like to be able to run it without a leg strap.

So that if I want to do a run and Gun event or anything that requires running more than about a quarter of a mile I don't want this business all up in my junk, chafing and whatnot.

So just going to really depend on how it all comes together and feels on body.

But for instance, with this setup I could get away it doesn't flop too much this way, it's.

This business that really that's where the leg strap kind of helps hold it onto your body is that kind of movement.

So let's get the new platform set up and we'll see how it goes from there, quick afterthought before I, pulled this apart.

I wanted to point out that this gbrs belt is an outer inner set, meaning, the outer belt velcro wants to be making contact with the Inner Belt.

In this case, male velcro that that belt is inside of my belt loops and I do lose velcro to velcro contact at this point, it's, not a huge deal.

It doesn't cause it to droop or sag very much.

But you do notice that you you're losing contact right there.

Whereas the rest of the belt as we go down, I lose a little bit there and there, but otherwise I'm maintaining velcro contact around the entire waist.

So this one little dead spot I will be remedying that with the new setup all right.

So we've got everything laid out ready to go here's.

A closer look at the mha itself.

It is very nicely, machined and anodized aluminum as are the Mali inserts sort of Molly.

And to make this work with the G-Code RTI system.

You do have to purchase an adapter.

And this is also aluminum so I'm going to spare you the fiddly, uh, finicky, I'm going to be loctiding, everything as I go.

So I'll, just check in as I get each stage finished.

So I set to work mating the adapter plate to the RTI wheel and quickly discovered that you want to insert these guys first here here.

And here then I'm just going to set the RTI wheel over and then I've already got some pre loctid guys here.

These will mate the wheel I'm working blind here.

These will make the wheel and the adapter plate, and then do the bottom ones.

Now you have the threads captive, and then that will mount on with your gaskets to the adapter itself.

All right so I have thoroughly loctid these and just a dab in here, because I may end up pulling these back out.

So I've got my little gaskets staged.

And what I'm thinking is probably going to be the setup is going to be that one.

So you have three choices of height and I'm going to start with the highest ride height and might end up lowering it once I get it all together.

But for now we're going to go ahead and start out here.

So I, didn't, go too crazy with the Loctite yet.

But basically that is how it's going to set up these come through the back and squish together.

So let me do that off camera.

So now I have the RTI wheel, Loosely affixed to the mha, but I want enough play in there.

So that I can decide what kind of can't I want to put on it.

And then I'll, go ahead, pull the screws, add Loctite and finalize that.

But next I want to get these guys hooked together onto the belt itself.

So after putting on the Belt doing a quick mock-up, this is the position that I want to lock this in.

So you can see I've got that screw all the way down that one is all the way up.

And this is all the way forward and basically what that's giving me? Well, you can see.

So there would be if I wanted a lot of can't, uh on the holster because I'm running Glock I've already got a lot of angle on the grip.

So I want that grip as flat as possible.

And so setting it up like that is the way I'm going to go ahead and permanently lock it down and real quick.

Before we go top side.

I just wanted to point out.

This is the leg strap adapter for the G-Code and it's, super super close, but not quite to matching up with the mha.

But with just about three seconds with a drill, I could widen these holes and make that work.

And then just use the screws that I already have and I might maybe if I decide I need a leg, strap I'm going to give that a try as opposed to dropping the 40 bucks for the true north, one or I might do the true, north I, don't know yet, but just wanted to throw that out there if you're contemplating making this conversion all right so I'm, digging it was it totally worth.

The nearly hundred dollars, yeah, it's, debatable, but I'm, taking it.

It definitely looks cool.

And you might be asking yourself.

Why not just go with the Safariland qls, Fork system, wouldn't that have been easier.

You've got a Safari Land, holster, yes.

It would except that I already have a whole other build already set up with the G-Code RTI.

And my other holsters are already configured to the RTI.

So it's a system that I'm already sort of invested in.

So at this point, it was like why not just keep going down that road I do like the way it locks up and I think they look a lot cooler than the Safari Land, I, don't know, why that's just totally subjective.

But anyway, so far I think I might be able to pull this off without running the leg strap.

It feels kind of right, uh, it definitely alleviates.

A lot of this motion that I was talking about with the G-Code that I got because it sandwiches in and really locks in onto the belt itself, it's, rigid.

So anyway, I'll report back over time.

But until next time, be easier.


What is an RTI hanger? ›

RTI Hanger - by G-Code

"The RTI (Rapid Transition Interface) is an advanced carry system designed for the tactical user. The system allows the operator to quickly and securely transition the holster based upon changing mission requirements.

Where is True North Concepts located? ›

Frequently Asked Questions regarding True North Concepts

Where is True North Concepts located? True North Concepts's headquarters are located at 7351 Pl Office Park, Melbourne, Florida, 32940, United States What is True North Concepts's phone number?

How does the RTI model work? ›

Response to Intervention, or RTI, is an educational strategy used in schools to: Provide effective and high-quality instruction, Monitor all students' progress to make sure they are progressing as expected, and. Provide additional support (intervention) to students who are struggling.

What is the G code for RTI hanger? ›

GCA39 - Universal RTI Hanger.

What is a G code 35 hanger? ›

The GCA35 Universal RTI Hanger is designed for heavy duty applications. This Aluminum mounting bracket is the male end of the G-CODE RTI System. The RTI Wheel (Part# GCA25) is sold seperately. We have seen customer photos of these mounted to radios, tools, cigarette/ dip can holsters you name it.

What holsters are compatible with Safariland QLS? ›

Compatible with all MWTS Gunslinger & Enforcer series holsters.

What is your true north example? ›

True North is your inner sense, or your calling, of what you want to accomplish in your life. It's a combination of your values, your beliefs, and your purpose. It keeps you on a straight track that's true for you. And it's different for every single person.

Who owns True North Concepts? ›

True North was born from the shared vision of its five founders led by Nathan Murr, inventor of the GripStop and CEO. They've come together to create smart, innovative tools that prepare men and women for any challenge that comes their way.

Who is true north owned by? ›

True North Sports and Entertainment was founded in 2001 by Manitoba Moose co-owner Mark Chipman and several local investors.

What are the 3 RTI models? ›

Comparing the Three Tiers
RTI TiersTypes of Interventions% of Students
Tier 1Universal instruction for all students>=80%
Tier 2Targeted intervention for specific groups of students6% – 15%
Tier 3Highly targeted individualized and intensive interventions1% – 5%
Jan 3, 2018

What are the 3 tiers of RTI? ›

Here's a look at the three tiers of RTI.
  • Tier 1: The whole class.
  • Tier 2: Small group interventions.
  • Tier 3: Intensive interventions.

Is it hard to learn G-code? ›

Is G-code Programming Difficult To Learn? G-code is a logical language that consists of a handful of commands that are repeatedly used. If you have an understanding of the working of a CNC machine, it will not be hard for you to learn G-code programming.

What is the G-code and M code? ›

G codes direct the machine's motion and function, while M codes direct the operations outside movements. The G code activates the CNC machine while the M code activates the machine's programmable logic controller.

What is G28 2 G-code? ›

What is G28 G-Code? The G-Code G28 is used to zero return the tool to its zero position via a reference point at rapid speed.

What is standard G-code? ›

G-code (also known as RS-274) is the name of the most prevalent programming language for computer numerical control (CNC) in computer-aided design and manufacturing (CAD/CAM). G-code provides metric-based numeric control of CAM-controlled equipment such as CNC milling machines.

What does G28 do in G-code? ›

The G28 code returns all axes (X, Y, Z, A and B) simultaneously to the machine zero position when no axis is specified on the G28 line. Alternatively, when one or more axes locations are specified on the G28 line, G28 will move to the specified locations and then to machine zero.

What is G code G58? ›

“G58” specifies work coordinates, changing geometry relative to work offsets, like part origin. “X-120.” means to go to “-120mm” on the X axis, and “Y-5.” means to go to “-5mm” on the Y axis. G-code can repeat an action indefinitely until it is stopped.

What are G codes G54? ›

List of G-codes commonly found on FANUC and similarly designed controls for milling and turning
CodeDescriptionTurning ( T )
G54 to G59Work coordinate systems (WCSs)T
G54.1 P1 to P48Extended work coordinate systemsT
G61Exact stop check, modalT
G62Automatic corner overrideT
45 more rows

What is the G code for fixture offset? ›

1.3 Fixture Offsets (G54-G59. 3) Work or fixture offset are used to make a part home that is different from the absolute, machine coordinate system. This allows the part programmer to set up home positions for multiple parts.

What holster does the FBI use? ›

The Hank Sloan-designed holster was created exclusively for the FBI's S&W Model 10 M&P . 38 revolver. The accompanying 2 + 2 + 2 drop pouch was used to quickly “top off” bullets in the cylinder of the revolver when reloading.

What is a FBI cant holster? ›

FBI cant simply refers to a specific angle at which your gun holster may be carried – usually tilted forward slightly, around 10-15 degrees. Not only does this cant angle make your weapon more accessible, but many find it easier and more comfortable to conceal.

What holster did John Wick use? ›

The Medina X was designed to be a “deep cover holster” intended to make weapon less obtrusive than from traditional appendix carry. It also features a small scabbard for an equally tiny knife from Ka-Bar. Cohen helped train actor Keanu Reeves for the starring role, which explains the choice of holster.

Should I use true north? ›

If using a compass with adjustable declination, set your GPS to true north. Your GPS will indicate a bearing of zero degrees must be followed to reach the waypoint. Adjust the declination on your compass so the orienting arrow points to 10 degrees east.

Can someone be your true north? ›

Your true north is unique to you. No matter how similar they are, no two people will have the same true north. It represents you as a person on the deepest level.

What does true north mean God? ›

The Gospel of Mark is like a compass. You pick it up and it always points to True North–Jesus Christ. And according to Mark, the True North that the whole world depends on to be reconciled back to God is Jesus Christ.

Who is the CEO of True North? ›

Biography: With more than 25 years of industry experience in claims, accounting, sales, operations, solution development, client service and team building, Jason brings a hands-on approach to value creation as CEO of TrueNorth.

What is the return policy for True North Concepts? ›

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

Who are the founders of True North? ›

Vishal has been at the helm of True North as its Managing Partner since its inception in 1999. Divya is responsible for investments and scaling up of businesses in the financial services sector. Kapil is responsible for establishing a best-in-class credit platform at True North.

Is TrueNorth a Coke product? ›

All questions we answer in a document we call Our True North. Our True North is our new mission, vision, and values framework for Coca-Cola Beverages Northeast.

Where are TrueNorth products made? ›

Made in North America, each True North appliance is designed for efficiency in both construction and performance – value priced, without compromising quality. With a full line of affordable wood, pellet and gas fuelled appliances, choose True North for maximum value, comfort, safety and ecology.

What brand is TrueNorth? ›

B&G Foods. Made with ingredients you can recognize, TrueNorth® nut cluster snacks are always free of artificial colors and artificial preservatives. Our nut clusters are the perfect portable snacks that combine freshly roasted nuts, sea salt and just a hint of sweetness, making them an indulgent, better-for-you treat.

What is the G-code for RTI hanger? ›

GCA39 - Universal RTI Hanger.

What is G-code RTI #35? ›

The GCA35 Universal RTI Hanger is designed for heavy duty applications. This Aluminum mounting bracket is the male end of the G-CODE RTI System. The RTI Wheel (Part# GCA25) is sold seperately. We have seen customer photos of these mounted to radios, tools, cigarette/ dip can holsters you name it.

How does RTI help in the identification process for a learning disability? ›

The Response to Intervention Process. The purpose of RTI is that of a prevention model to limit or prevent academic failure for students who are having difficulty learning by providing “scientific research-based interventions” to bring students up to grade level achievement.

What are G codes used for reimbursement for? ›

G-codes are used to report a beneficiary's functional limitation being treated and note whether the report is on the beneficiary's current status, projected goal status, or discharge status.

What are the G codes and M codes? ›

G-code directs the motion and function of the CNC machine, while M-code controls the operations not involving movements. G-code activates the CNC machine, and M-code activates the machine's programmable logic controller. G-code commands often differ in CNC machines, while most M-code commands remain the same.

What is basic M code G-code? ›

M code is the machine control language that controls the overall program, often called G code. While G commands describe positions, M code directs the machine's actions. While M represents miscellaneous codes, some refer to it as machine code because it controls particular operations of the equipment.

What are standard G codes and M codes? ›

G code commands tend to differ in most CNC machines, while M codes are similar in most CNC machines. G codes direct the machine's motion and function, while M codes direct the operations outside movements. The G code activates the CNC machine while the M code activates the machine's programmable logic controller.

What does G28 mean in G code? ›

The G28 code returns all axes (X, Y, Z, A and B) simultaneously to the machine zero position when no axis is specified on the G28 line. Alternatively, when one or more axes locations are specified on the G28 line, G28 will move to the specified locations and then to machine zero.

What is G 43 G code? ›

A G43 code selects tool length compensation in the positive direction; the tool length in the offsets page is added to the commanded axis position. A G44 code selects tool length compensation in the negative direction; the tool length in the offsets page is subtracted from the commanded axis position.

What is G 94 G code? ›

This code deactivates G93 (Inverse Time Feed Mode) and returns the control to Feed Per Minute mode.

Is RTI only for students with disabilities? ›

Response to Intervention (RTI) is a system of supports that schools put in place to provide high-quality education to students with disabilities. It was originally developed as an overall framework for prediction, remediation and prevention of negative outcomes common for students with disabilities.

Does Medicare pay for G codes? ›

The Centers for Medicare & Medicaid Services (CMS) added 50 G codes effective Jan. 1; seven are for physician services and assigned relative value units (RVUs), meaning providers can bill Medicare and get paid for these codes, as appropriate.

Are G codes still required for Medicare? ›

Note: Due to CY 2019 Physician Fee Schedule (PFS) rulemaking, effective for dates of service on or after January 1, 2019, Medicare no longer requires the functional reporting of nonpayable HCPCS G-codes and severity modifiers − adopted to implement section 3005(g) of MCTRJCA − on claims for therapy services.

Do you bill G codes to Medicare Advantage plans? ›

A - Yes. Traditional Medicare and all managed Medicare plans will accept the G codes for AWVs. Q - Can I bill a routine office visit with a Medicare AWV?

Top Articles
Latest Posts
Article information

Author: Francesca Jacobs Ret

Last Updated: 09/01/2024

Views: 5361

Rating: 4.8 / 5 (68 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Francesca Jacobs Ret

Birthday: 1996-12-09

Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

Phone: +2296092334654

Job: Technology Architect

Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.